All of our products are proudly sold exclusively at The Home Depot.
We have answers.
Enter a keyword in the search field to look for a question (e.g. "gate") or browse through the categories below. If you can't find the answer to your question, do not hesitate to contact us.
Single large glass panels require a 6 foot glass gasket (model 90940, sold separately). The kits that contain 7 x 6 inch panels come with all of the fittings necessary for installation.
No, Peak MountainView glass panels are not available in tinted.
Fasteners are included with the Spigot, Gate Latch & Hinges, 42" Post, and End Bracket.
Yes, the Peak MountainView glass panels are fully tempered for safety and durability.
No, we do not recommend cutting the light strips. To conceal excess strip, simply feed in to one or more of the post columns so the strip is evenly distributed.
Yes, the Peak MountainView Glass Railing System can be installed on concrete surfaces. Please refer to the installation guide for recommended anchoring fasteners when attaching the spigot, post base, and end bracket to concrete structures. Building codes may vary. Always understand and comply with your local building codes. For further information, visit our Compliance page.
Yes, RailBlazers can be installed on concrete surfaces. Please refer to the compliance section for recommended fasteners.
We do not recommend painting the Peak MountainView Glass Railing system, as this hasn't been tested and could affect your warranty.
Yes, the Peak MountainView Glass Railing System can be installed on a composite deck. Remember to follow building code requirements and add blocking material where necessary. Please refer to the installation guide. Building codes may vary. Always understand and comply with your local building codes. For further information, visit our Compliance page.
Yes, RailBlazers Aluminum Railing can be installed on a composite deck. Remember to follow building code requirements and add blocking material where necessary.
We do not have a glass infill option for stairs. Our narrow or wide pickets provide the infill solution for staircases.
Yes, the Peak LED Lighting can be retro-fit on existing RailBlazers Aluminum Railing
Our glass panels are fully tempered and, therefore, are not able to be cut. Tempered glass panels are much stronger than ordinary glass. They can withstand strong winds and direct impact from bumps. Tempered glass panels are also resistant to heat and scratches. For safety, tempered glass panels are designed to fracture into small, relatively harmless pieces when broken.
Our glass panels are fully tempered and therefore are not able to be cut.
No, for safety reasons, only pickets can be used for stair railing applications.
Our fascia mount brackets come with an offset base rail support that is fastened to the fascia board.
The Peak MountainView gate latch & hinges come with all the required fasteners you need to assemble and install a fully functional gate.
The RailBlazers Aluminum Railing gate comes with everything you need to assemble and install a fully functional gate in a 46 inch rough opening. See instructions for modifying the width of the gate to fit smaller openings than 46 inches. *cannot be made larger.
Use the Peak MountainView angle bracket to accommodate glass railing installations with angles other than 90 degrees.
At this time our large glass panels are only available in a clear variety. For a tinted option, we do offer 6” glass panels that come tinted.
The Peak LED Lighting works with an app on your smartphone or tablet.
Peak MountainView comes with a 20-year limited warranty for complete peace of mind.
RailBlazers comes with a 20 year limited warranty.
Use our stainless steel end bracket to connect your Peak MountainView Glass Railing to a wall or an existing post.
Wall mount brackets are secured to walls or existing posts using lag bolts and can be used in place of a post.
Easily clean your glass railing using warm soapy water followed by thoroughly rinsing away all soap residue with clear water.
Easily clean your railing using warm soapy water followed by thoroughly rinsing away all soap residue with clear water.
Simply use the mid bracket, corner bracket or angle bracket to join two Peak MountainView top rails together.
We have a variety of tempered glass panel sizes available to suit any project. Glass panels in 24”, 27”, 33” or 36” widths are available in select stores and via Special Order. Additional custom glass panels between 18" and 36" wide in 1.5" increments are also available in-store via Special Order only.
Yes, glass panels are available in sizes ranging from 18" up to 66". The sizes increase in 3 inch increments.
Stainless steel is extremely heavy-duty and can be tough to cut without the right tools. If you need to customize your Peak MountainView top rail, we highly recommend using a chop saw or hacksaw with stainless steel cutting blade to make a clean cut.
Peak MountainView is currently offered in 42" height to suit the majority of applications.
Peak MountainView glass gates are available in two sizes. Choose from a 36" or 42" glass gate depending on your deck project. Gates are available in-store for Special Order.
The RailBlazers gate fits up to a 46" rough opening without any alterations. RailBlazers gates feature a removable post on one end that allows you to cut the gate down to the size you need. Simply remove the post, mark and cut the gate according to the installation instructions, reattach the removable post and secure with the self-drilling fasteners provided.
Yes, RailBlazers® glass is fully tempered safety glass. RailBlazers® glass is identified by a small PEAK logo etched into the bottom corner of each glass panel. Each North American standard that the glass panels meet is etched into the bottom corner of each glass panel. Always comply with all applicable building codes.
Disconnect the power from the controller, plug back in and hold the reset button for 10 seconds. Release and the lights will flash. You should now see the Peak Wi-Fi in your device's Wi-Fi settings.
Stainless steel delivers the best combination of elegance, strength and durability. It is a heavy-duty material that requires virtually no maintenance compared to plastic or wood. Stainless steel also has a higher heat resistance than plastic or wood, making it a better option for outdoor railing.
Our standard rebar is manufactured to the Canadian standard CSA G 30.18, Grade 400 W
The Peak MountainView Glass Railing system is only available in brushed stainless steel.
The fasteners that come with the Peak MountainView spigot, post, gate hardware, and end bracket are made of stainless steel.
Glass gaskets are available in 6' lengths. Each 6' set contains one handrail glass gasket (larger of the two gaskets) and one base rail glass gasket (smaller of the two gaskets).
Standard pickets are16mm x 16mm x 950mm (L x W x H), Wide pickets are 38.1mm x 16mm x 950mm (L x W x H), Stair pickets are
To successfully install the Peak MountainView Glass Railing, you will need:
- Chop saw or hacksaw with stainless steel cutting blade
- Measuring tape
- String or chalk line
- Hex keys: 2.5mm, 3mm, 4mm, 5mm, 6mm
- Utility knife
- Drill bits for wood: 1/4", 5/32"
- Drill bit for stainless steel: 1/4"
- Socket or hex driver: 3/8"
- T40 Torx driver bit
- Rubber mallet
- Dish soap
- Non-corrosive exterior silicone caulking
- Concrete anchoring fasteners (for concrete applications only)
The RailBlazers® system is coated with a durable and attractive powder coat finish. In the event your RailBlazers® is scratched, visit your local home improvement retailer and speak to a paint expert for suggestions on the best touch up solution.
A mitre saw with a non-ferrous blade is best.
Peak MountainView Glass Railing is sold exclusively at The Home Depot.
RailBlazers Aluminum Railing is sold exclusively at The Home Depot