All of our products are proudly sold exclusively at The Home Depot.

No, Peak MountainView glass panels are not available in tinted.

Fasteners are included with the Spigot, Gate Latch & Hinges, 42" Post, and End Bracket.

Yes, the Peak MountainView glass panels are fully tempered for safety and durability.

Yes, the Peak MountainView Glass Railing System can be installed on concrete surfaces. Please refer to the installation guide for recommended anchoring fasteners when attaching the spigot, post base, and end bracket to concrete structures. Building codes may vary. Always understand and comply with your local building codes. For further information, visit our Compliance page.

We do not recommend painting the Peak MountainView Glass Railing system, as this hasn't been tested and could affect your warranty.

Yes, the Peak MountainView Glass Railing System can be installed on a composite deck. Remember to follow building code requirements and add blocking material where necessary. Please refer to the installation guide. Building codes may vary. Always understand and comply with your local building codes. For further information, visit our Compliance page.

Our glass panels are fully tempered and, therefore, are not able to be cut. Tempered glass panels are much stronger than ordinary glass. They can withstand strong winds and direct impact from bumps. Tempered glass panels are also resistant to heat and scratches. For safety, tempered glass panels are designed to fracture into small, relatively harmless pieces when broken.

No, for safety and compliance reasons, Peak MountainView Glass Railing should not be used for stair railing sections. To learn about stair railing options, please feel free to email us at cservice@peakproducts.com or call our friendly customer service team at 1 (877) 883-7325.

The Peak MountainView gate latch & hinges come with all the required fasteners you need to assemble and install a fully functional gate.

Use the Peak MountainView angle bracket to accommodate glass railing installations with angles other than 90 degrees.

Peak MountainView comes with a 20-year limited warranty for complete peace of mind.

Use our stainless steel end bracket to connect your Peak MountainView Glass Railing to a wall or an existing post.

Easily clean your glass railing using warm soapy water followed by thoroughly rinsing away all soap residue with clear water.

Simply use the mid bracket, corner bracket or angle bracket to join two Peak MountainView top rails together.

We have a variety of tempered glass panel sizes available to suit any project. Glass panels in 24”, 27”, 33” or 36” widths are available in select stores and via Special Order. Additional custom glass panels between 18" and 36" wide in 1.5" increments are also available in-store via Special Order only.

Stainless steel is extremely heavy-duty and can be tough to cut without the right tools. If you need to customize your Peak MountainView top rail, we highly recommend using a chop saw or hacksaw with stainless steel cutting blade to make a clean cut.

Peak MountainView is currently offered in 42" height to suit the majority of applications.

Peak MountainView glass gates are available in two sizes. Choose from a 36" or 42" glass gate depending on your deck project. Gates are available in-store for Special Order.

In the uncommon situation where a component of our glass railing system is missing or defective, we encourage the customer to contact us directly via email at cservice@peakproducts.com, or telephone at 1 (877) 883-7325. We stand by our products and make customer satisfaction our highest priority.

Stainless steel delivers the best combination of elegance, strength and durability. It is a heavy-duty material that requires virtually no maintenance compared to plastic or wood. Stainless steel also has a higher heat resistance than plastic or wood, making it a better option for outdoor railing.

The Peak MountainView Glass Railing system is only available in brushed stainless steel.

The fasteners that come with the Peak MountainView spigot, post, gate hardware, and end bracket are made of stainless steel.

To successfully install the Peak MountainView Glass Railing, you will need:

• Chop saw or hacksaw with stainless steel cutting blade
• Level
• Measuring tape
• String or chalk line
• Hex keys: 2.5mm, 3mm, 4mm, 5mm, 6mm
• Utility knife
• Drill
• Drill bits for wood: 1/4", 5/32"
• Drill bit for stainless steel: 1/4"
• Socket or hex driver: 3/8"
• T40 Torx driver bit
• Rubber mallet
• Dish soap
• Non-corrosive exterior silicone caulking
• Concrete anchoring fasteners (for concrete applications only)

Peak MountainView Glass Railing is sold exclusively at The Home Depot.